TV Mounting in North York Homes | Worldwide Handyman

North York · City of Toronto

TV Mounting for North York Homes

TV mounting in North York usually means one of two houses. A 1960s bungalow or side-split with plaster walls and solid framing, or a Yonge Street condo where the wall behind the drywall is concrete. Both hold a TV well once the right anchors go in.

I look at where you sit before I mark anything, since height matters more than most people expect. Cables get tucked into the wall when the construction allows and into a channel when it does not. Free quote first, price agreed before I start, and the room left clean.

The bungalows and side-splits through Bathurst Manor, Downsview and Don Mills are framed on a dependable sixteen inch layout, but the finish is plaster skimmed over gypsum lath, so it chips if you drill without scoring it first. Side-split family rooms sit half a storey down with a beam overhead, which limits where a cable can run. Along Yonge in Willowdale the towers are concrete, and the rebuilt houses behind them have tall great rooms and stone surrounds instead.

Get a Free Quote +1 (437) 929-3015

TV Mounting in North York

Areas covered

Willowdale Bayview Village Newtonbrook Lansing Bathurst Manor Armour Heights York Mills Hoggs Hollow Don Mills Henry Farm

Booking

Mon – Sat: 8:00 AM – 8:00 PM
Sunday: By appointment

Full guide

Read everything about tV Mounting

All work in this area

Handyman services in North York

Typical Calls

TV Mounting Jobs in North York

TV mounted over a Don Mills bungalow fireplace

Full-motion arm in a Willowdale condo living room

Side-split family room mount with cables run inside

Second TV for a North York basement apartment

Larger screen rehung on an existing Bayview Village bracket

Included

What TV Mounting Covers

Stud location confirmed before any drilling
Fixed, tilting or full-motion bracket fitted
Concrete and hollow block anchored correctly
Screens levelled and centred to your seating
Cables concealed in raceway or wall
Soundbar mounted centred under the screen
Existing wall mount removed and holes filled
Devices connected and picture checked

Full tV Mounting guide

How It Runs

From Message to Finished Job

1

Photos and details

Send a photo of the wall and the model of your TV. That tells me the screen size, the VESA pattern and usually the wall construction, which is most of what I need to quote the mount accurately.

2

Wall survey on site

On arrival I scan for studs, pipes and wiring, confirm the framing by probing inside the bracket footprint, and agree the exact height with you before a single hole is drilled. Marking is done with a level, not by eye.

3

Bracket and screen fitted

The wall plate goes up and gets checked for level, the arms are bolted to the back of the television with the correct length hardware, and the screen is lifted on and locked. Then it is levelled again under load.

4

Cables, test, tidy

Cables are routed and hidden by the method you chose, the picture is tested on your inputs, and the mount is exercised through its full movement so nothing snags. Dust and packaging go with me and the floor gets a vacuum.

What Affects the Price in North York

Screen size and wall type drive most of it. A mid-size television into wood studs is quick work. The same screen onto concrete, brick or hollow block takes longer and needs specific anchors, and a large panel needs careful handling. Full-motion arms take more time than fixed plates. Cable concealment adds to the job depending on which method you choose, and supplying the bracket yourself or having me bring one changes things too. The price is agreed with you before I drill.

Nothing starts before the price is agreed. Send a photo or two with your request and I can usually quote without a site visit.

Asked in North York

Can the cables be hidden inside the plaster walls of my Willowdale bungalow?

Usually yes. Behind the plaster there is a normal stud bay, so I can cut two small openings, drop the cable down inside the wall and finish with recessed plates. Older plaster is brittle, so I cut it rather than punch it. If that wall turns out to be solid brick, or there is fire blocking in the way, I will suggest a slim channel painted to match instead.

Also in North York